Tweco 7-3484 User Manual download pdf

August 11, 2003 / 11 Août, 2003 1 Manual / Manuel 0-2993

Manual 0-2993

RPT Adapter Kit

No. 7-3484

Installation Instructions

82 Benning Street, West Lebanon, NH 03784 USA

(603) 298-5711 • www.thermal-dynamics.com

Procedure

WARNING

Disconnect primary input power at the source and

bleed down the system before starting this proce-

dure.

1. Remove the power supply cover per the power

supply manufacturer's instructions.

2. Disconnect the original torch (including the wire

harness connected to the printed circuit board

mounted vertically on the back side of the power

supply front panel) per the power supply

manufacturer's instructions. Remove the torch,

the torch leads, and the strain relief from the

power supply. Store any torch replacement parts

with the original torch.

3. Disconnect the gas hose from the inlet side of the

power supply solenoid. Push in on the fitting to

release the hose, and pull the hose straight out.

4. Disconnect two 'Faston' connectors from the

power supply solenoid.

5. Remove two screws securing the power supply

solenoid assembly to the vertical support bracket.

Lift the solenoid assembly out of the power sup-

ply.

6. Hold the solenoid assembly securely. Remove the

brass fitting from the solenoid outlet port.

General Information

This kit connects Thermal Dynamics 1Torch Adapters or

SL60 / SL100 Torch leads to Hypertherm* powermax*

350 Power Supplies. Do not use this kit with any other

equipment. Read these instructions before starting the

installation procedure. Keep these instructions for fu-

ture reference.

CAUTION

Only a qualified technician should perform this pro-

cedure.

Parts Supplied

The kit includes:

• RPT Adapter Assembly

• Adapter Fitting

• Four - Wire Harness with Connectors

• Butt Splice

• Insulating Sleeves (2)

• Tie Wraps (2)

• Strain Relief Assembly

• Instructions

Hypertherm and powermax are registered trademarks of Hypertherm, Inc.

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Parts Supplied

August 11, 2003 / 11 Août, 2003 1 Manual / Manuel 0-2993Manual 0-2993RPT Adapter KitNo. 7-3484Installation Instructions82 Benning Street, West Leban

Page 2

August 11, 2003 / 11 Août, 2003 2 Manual / Manuel 0-29937. Install the black plastic Adapter Fitting includedin this kit in the solenoid outlet port

Page 3

August 11, 2003 / 11 Août, 2003 3 Manual / Manuel 0-299316. Slide the strain relief securing nut onto the ATCAdapter Leads or torch leads assembly.

Page 4

August 11, 2003 / 11 Août, 2003 4 Manual / Manuel 0-2993

Page 5 - Pièces Fournies

August 11, 2003 / 11 Août, 2003 5 Manual / Manuel 0-2993Manuel 0-2993Kit D’Adapteur De RPTNo. 7-3484Instructions D’InstallationInformations Générales

Page 6 - A-03721F

August 11, 2003 / 11 Août, 2003 6 Manual / Manuel 0-299311. À l’intérieur de l’alimentation d’énergie, coupezle connecteur 'faston‘ outre du fil

Page 7 - D'Énergie

August 11, 2003 / 11 Août, 2003 7 Manual / Manuel 0-299318. Diapositive un des douilles isolantes incluses dansce kit sur le fil pilote de fils de ki

Page 8

Comments to this Manuals

No comments

Tweco 7-3484 User Manual

Browse online or download User Manual for Hardware Tweco 7-3484. Tweco 7-3484 Manuel d'utilisation

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Tweco 7-3484